| Armrests |
Standard |
| Battery |
12V |
| Bedknife Adjustment |
Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment. |
| Blade Style/Type |
Reel |
| Blade Type (Description) |
EdgeSeries DPA radial or forward swept reels. |
| Cab Unit |
N/A |
| Clip Frequency/Backlapping |
7" reel 1,600 rpm max reel speed, at highest setting. 200 rpm max at low idle and lowest setting for backlapping. |
| Controls |
Foot operated controls: Forward and reverse traction pedal, mow/transport speed limiter. Hand operated on control panel: Parking brake lever, ignition switch, engine throttle lever, LED headlight switch, on/off switch for cutting units, joystick for cutting unit lift and lower. Other controls: Steering wheel tilt control, reel speed control, backlap engagement lever. |
| Cooling System Description |
Aluminum side-by-side oil cooler/radiator. 8.5 fins per inch, wavy fin, non-louvered. 5.25 quart (4.9 liter) capacity. |
| Cup Holder |
Standard |
| Cutting Unit Accessories |
Rear Roller Brush Kit, Universal Groomer, Broomer, Grass Baskets |
| Cutting Unit Lift/Lower |
Hydraulic - front and rear cutting unit lift/lower are sequenced for uniform starting and ending points. |
| Cutting Unit Type/Configuration |
Five hydraulically driven, balanced, DPA cutting Units. Frame precision manufactured, die-cast aluminum for increased strength, simple click adjustment maintenance. |
| Drivetrain |
Diesel |
| Electrical System |
Heavy-duty 12-volt battery, 570 CCA; 40 amp alternator/regulator. Electronic control unit is microprocessor based, solid state control unit with diagnostic capabilities. |
| Engine Cooling |
Liquid Cooled |
| Fuel / Power Source |
Diesel / Biodiesel |
| Fuel Capacity |
7.5 U.S. gal. (28.4 L) |
| Fuel Filter |
10 micron spin-on filter with integral water separator. |
| Gauges/Instrumentation |
Hour meter, fuel gauge, diagnostic lamp, cluster gauge with glow plug and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off). |
| Ground Speed - Forward |
0 - 10 mph (0 - 16.1 km/h) |
| Ground Speed - Reverse |
0 - 3.5 mph (0 - 5.6 km/h) |
| Height |
81" (206 cm) |
| Height of Cut Range |
8-Blade: 0.5"-2.0" (13 mm - 51 mm) 11-Blade: 0.25"- 0.75" (6 mm - 19 mm) |
| Hydraulic Fluid Capacity |
6 U.S. gal. (22.7 L) |
| Hydraulic Fluid Type |
Toro PX Extended Life Hydraulic Fluid |
| IntelliDash Capable |
Yes |
| Interlocks |
Traction pedal neutral, parking brake, operator presence in seat, and cutting unit engage/disengage safety interlock switches. |
| Lighting |
Standard |
| Main Frame/Chassis |
Formed steel, welded steel and steel tubing. |
| Max Slope Angle |
Refer to operator's manual. |
| Mowing Speed |
0 - 7 mph (0 - 11.3 km/h) |
| Number of Blades |
11, 8 |
| Oil Capacity |
3.5 U.S. qt. (3.3 L) |
| Oil Cooler Description |
Pressurized lubrication system. |
| Optional Accessories |
Sunshade (with optional operator cooling fan, LED work lights, rotating amber beacon) |
| Overall Width |
112" (274 cm) |
| Parking/Service Brakes |
Hydrostatic service brake. Hand-operated parking brake. |
| Power Steering |
Yes |
| Power Train (Engine Description) |
Kubota liquid-cooled diesel engine, 3-cylinder, 24.8 hp (18.5 kW) @ 3000 RPM. Engine governed to 3220 RPM high idle ( 50 RPM), 1400 RPM low idle ( 50 RPM). Displacement: 68.5 cu.in. (1123 cc). Peak torque: 57.2 lbs-ft @ 2200 RPM. Tier 4 and Stage V compliant. |
| Product Length |
105" (266 cm) |
| Reel Diameter |
7 in. (17.8cm) |
| Reel/Cylinder Drive |
Hydraulic |
| Rollers |
Wiehle front roller and standard rear roller included. Optional front full and shoulder rollers, and short and long rear rollers available. |
| Safety/Operator Safety |
2-post ROPS and retractable seat belts standard. |
| Seat |
Mechanical suspension standard. |
| Starting |
Switch |
| Steering System Description |
Hydraulic power steering, tilt wheel. |
| Tires - Front |
22" x 12" - 12", 4-ply, No Tread |
| Tires - Rear |
22" x 12" - 12", 4-ply, No Tread |
| Tool Box |
Standard |
| Traction Drive |
3WD |
| Traction Drive (System) |
Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in forward and reverse. |
| Transport Width |
91" (231 cm) |
| Weight |
1,755 lbs. (796 kg) with no cutting units. 2,550 lbs. (1,156 kg) with (5) 5" reels, 22" width, 8-blade cutting units. |
| Width of Cut |
100" (254 cm) |